SKU: DT85

Type 85 Direct Box

Product Options: Clear Options

Out of stock

Type 85 Direct Box

PRODUCT FEATURES

The classic Type 85 connects any high-impedance instrument pickup, even piezo pickups, to a balanced microphone (XLR type) input. It provides a strong, clean signal to the mix board without adding noise or distortion. It won’t change the tone or volume you hear from your own amp like passive direct boxes. It won’t break just when you need it. It won’t develop a dead battery on stage because it runs on Phantom power.

SIMPLY EXCEPTIONAL SOUND

SIMPLY EXCEPTIONAL SOUND

The Type 85 uses only hand-selected high-quality discrete components woven into a single-ended class A circuit, much like a classic tube microphone preamp. The Type 85 has an incredibly smooth, sweet sound. Unlike many active DI boxes, the Type 85 can always isolate ground, even when running on Phantom power, to help eliminate hum and buzz from ground problems.

PURE AND SIMPLE

PURE AND SIMPLE

The Type 85 simply works. Provide 48 V Phantom power and the Type 85 will automatically use it. If you don’t have Phantom power, the Type 85 will run for about 400 hours from a single internal 9 V battery. The Type 85 doesn’t have roll off switches or effects. Adjusting the frequency content of a sound source is an artistic decision best done at the mixing location where you can hear the results and easily make changes.

CRUSH THE COMPETITION

Okay: we’re a little obsessed with direct boxes. We enjoy inspecting aluminum extrusions for nicks, browsing switch datasheets during lunch, and devising new ruggedness tests for our legendary Type 85, and new Type 10, Type 10S Stereo, and Type 85S Stereo boxes. In our defense, the DI is one of the first elements in your system, and the way it performs can make or break your sound. Every Countryman Direct Box is built unreasonably tough, because we know life on the road and in the studio is rarely reasonable. When it comes to outrageous ruggedness, Countryman DIs crush the competition.

INDESTRUCTABLE

Connectors and switches are recessed into a single-piece extruded case with extra-thick walls. You can literally drive a truck over a Type 85 without hurting it. Internal electronics are molded in a solid epoxy block and fully protected against electrical damage. The input can withstand 220 V AC all day long and static spikes up to 20,000 V.

Type 85 Direct Box

WHAT'S INCLUDED

WHAT’S INCLUDED?

  • Type 85 Direct Box

TECH SPECS

Frequency Response:
20 Hz to 20 kHz (+/- 1 dB)
Noise (Shorted Input):
0.63 uVrms (-122 dBVrms)
Distortion (1 VPP in):
THD (1 kHz): < 0.018%
IMD (10 kHz/60 Hz, 4:1): < 0.08%
Power Options:
48 V Phantom (0.4 mA)
9 V Battery (400 hours on a typical alkaline)
Input Protection:
220 Vrms and 20,000 V static discharges
Voltage Gain:
Pickup mode: -10 dB
Speaker mode: -46 dB
RF Filtering:
Input: 250 kHz low-pass filter
Output: 30 kHz low-pass filter
Maximum Input Level (1% THD):
Pickup mode: 5 Vpp
Speaker mode: 300 Vpp
(Equal to 2,800 Watts into 4 Ohms)
Input Resistance:
Pickup mode: 10 MOhm (10 times the input impedance of a typical guitar amplifier)
Input Capacitance:
160 pF (equal to 2 m of low-capacitance guitar cable)
Dimensions:
5" x 3" x 1.75" (127 mm x 77 mm x 45 mm)
Weight:
18.5 oz (0.52 kg)
FAQ

Product Questions, Answered

RELATED PRODUCTS